Regal Autosport Lubricants and other Products

Site Map

Contact Us

Terms & Conds

Online Catalogue > Millers Oils Products > Lubricants and other Products

	XF Longlife DESCRIPTION: A high performance full synthetic petrol and diesel engine oil. APPLICATION: Suitable for use in petrol and diesel engines as recommended by VAG for use with variable service intervals (WIV) and other vehicles that require a fuel efficient lubricant. USER BENEFITS: The high quality of this oil means that fuel economy is maximised at the same time as engine wear is being minimised. Oil viscosity or thickness is maintained even under the most severe of operating conditions thereby ensuring maximum engine protection. PERFORMANCE PROFILE: Exceeds the requirements of VW 503.00, 506.00 and 506.01 so is suitable for widespread use in VW petrol and diesel engines as recommended by the manufacturer. Also exceeds the requirements of ACEA A1B1 and A5B5 TYPICAL CHARACTERISTICS: SAE Grade SAE 0W/30 Specific Gravity @ 15C 0.856 Kinematic Viscosity @ 100C 9.4cSt Viscosity Index 164 Pour point C -36 Flashpoint C 205 HEALTH AND SAFETY: Health and Safety Data Sheet 2514-1 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department Price: £47.39 (Including VAT at 15%)
	Quantity:

	CRX LS 8w90 5L DESCRIPTION: * Competition Semi-Synthetic Gear Oil for 'Limited Slip' differentials. f Synthetic base stocks in combination with shear stable viscosity modifiers, high quality extreme pressure additive and selected oil stocks. APPLICATION: Use as received for lubrication of final drives which incorporate plate type limited slips USER BENEFITS: Race developed version of Millers CRX with friction modifiers to give smooth lock up, minimal chatter and optimum performance. * Semi-synthetic formulation provides exceptional cold flow properties for easier gear changing and minimum power loss. * Very good oxidation resistance and thermal stability maintain internal cleanliness in high temperature operating conditions. * High film strength for maximum component protection, reduced friction, heat and wear. * Suitable for use in older transmissions from 60's and 70's where 100% mineral oils would have been specified. PERFORMANCE PROFILE: The systems employed satisfy the performance requirements of:- API GL5] API MT1] * MIL-PRF-2105E ZF [Gearboxes and differentials] * Recommended for competition transmissions made by Hewland, Xtrac, Glebe Transmissions, ZF and all major car manufacturers. * Not recommended for syncromesh gear boxes. * May be used in 'dog' boxes. Note: For optimum results, run in new or rebuilt transmissions on Millers Classic Gearbox Oil 80W-90 before changing to CRX 80W-90. TYPICAL CHARACTERISTICS: Viscosity classification SAE 80W-90 Density @ 15oC 0.862 HEALTH AND SAFETY: Health and Safety Data Sheet 1202 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £33.91 (Including VAT at 15%)*
	Quantity:

	Racing Brake Fluid 500ml DESCRIPTION: Extra high boiling point brake fluid exceeding the requirements of SAE J1703, SAE J1704 and FMVSS 116 DOT 4 for use in braking system in competition use. APPLICATION: Use as received for racing braking systems where a non-mineral fluid is required and high braking temperatures are experienced. This specialised Racing Brake Fluid is intended for competition use only. USER BENEFITS: Enhanced high temperature performance over DOT 4 fluids. Racing Brake Fluid 300 Plus has a dry boiling point of above 300°C in comparison to the 230°C required for standard DOT 4 fluids. Thus giving it the capability to perform at the high braking temperatures found under arduous racing conditions. Robust against water absorption, improving resistance to vapour lock. Mutually compatible with all fluids meeting the same specifications. PERFORMANCE PROFILE: Equilibrium Reflux Boiling Point - Above 300°C (310°C typical) Wet Equilibrium Boiling Point - Above 194°C Kinematic Viscosity at –40°C - Below 1750cSt SAE - J1703 and J1704 FMVSS 116 - DOT 4 HEALTH AND SAFETY: When used for the purpose recommended and with due regards to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £12.66 (Including VAT at 15%)
	Quantity:

	Extra Cool 1L DESCRIPTION: Concentrate multi-metal corrosion inhibitor and coolant enhancer APPLICATION: Dilute with water in the ratio 1 part EXTRA-COOL to 50 parts water [2% solution] for corrosion inhibition of vehicle cooling systems and deposit reduction. USER BENEFITS: * Helps to maintain flow of radiators. * Reduces deposit formation in radiators. * Provides powerful corrosion protection for all metals found in engines e.g. aluminium, cast iron, etc. PERFORMANCE PROFILE: * Reduces engine damage from internal coolant leaks. * Mixes with all good quality antifreezes. * Does not provide antifreeze protection. Note: Antifreeze is often based on ethylene or propylene glycol which are insoluble in oil. Internal coolant leaks may cause damage to highly stressed bearings TYPICAL CHARACTERISTICS: Specific Gravity @ 20oC 1.172 Colour: Blue HEALTH AND SAFETY: Health and Safety Data Sheet 1304 applies to this product. When used for the purpose recommended and with due regard to the appropriate Health and Safety Data, the product should cause no concern. If in doubt, consult with Millers Oils Technical Department. Price: £23.07 (Including VAT at 15%)
	Quantity:

Online Catalogue > Millers Oils Products > Lubricants and other Products